Thread: #3 Plug Arcing
View Single Post
Old 09-15-2014, 07:01 PM   #3
gnormoyle
Junior Member
 
Join Date: Dec 2011
Location: FResno
Posts: 12
Default Re: #3 Plug Arcing

Thanks for the responses. I think I solved the problem. The rotor to distributor housing was all over the place and actually kissing the #3 electrode. I bent the rotor electrode to increase the clearance on #3 to .035" and filed the rest down to .035". Set the points to .022" and retimed. Swapped the plugs around and re-gapped to .035"
Runs good and no random sparks now. I love this forum
gnormoyle is offline   Reply With Quote