View Single Post
Old 04-08-2021, 11:00 PM   #6
will.rynerson
Senior Member
 
will.rynerson's Avatar
 
Join Date: Oct 2020
Location: San Diego
Posts: 129
Default Re: Fuel Tank conversion to Pick up bed

Sponsored Links (Register now to hide all advertisements)
CCP
Steering • Brakes • Suspension Call the Experts
1957-1960 Ford F-100 Aluminum 15-Gallon Fuel Tank

**Our aftermarket in bed fuel tanks bolt to the bottom of the frame in-between the frame rails after the rear axle. Removal of the bed may be necessary for installation**

These aluminum tanks are a must for anyone wanting move the original style tank from behind the seat to under the bed, between the frame rails. The tank comes fully
baffled and is designed to work with a fuel cap on top of the bed for fuel filling. The tank comes with the fuel pick up with a -6AN fitting and an attached steel tube.
A roll over valve is also included - that will stop gas from spilling out if the tank would happen to be upside down. There is also a preset spot for the sending unit and two ports on the bottom of the tank for fuel injection (one of the port can be plugged as well for carburetor applications).

Features:
Aluminum construction
15 gallon capacity
Bed fill design
28.25" wide
16.5” deep
8” tall
32.25" overall width including mounting flanges
Included rollover valve
Two fuel outlets
Requires rear crossmember removal
(Part# AGT-BTANK)

I Guess I know what the holes are for now.
__________________
Thanks,
Will

“1Tim 3:16 And without controversy great is the mystery of godliness: God was manifest in the flesh, justified in the Spirit, seen of angels, preached unto the Gentiles, believed on in the world, received up into glory.”‬
will.rynerson is offline   Reply With Quote