The Ford Barn - View Single Post - Troubles installing 6v pos ground turn signals

drolston · 05-18-2022, 02:44 PM

If you wire it exactly per instructions, it will work. One step is breaking the connection between the two rear brake lights. You are required to run a separate wire for the brake light that is disconnected. Ther is also a wiring change at the brake light switch.
Double check those connections to the wire bundle from the switch unit.

05-18-2022, 02:44 PM	#2
drolston Senior Member Join Date: Jun 2014 Location: Williamsburg, VA Posts: 1,627	Re: Troubles installing 6v pos ground turn signals If you wire it exactly per instructions, it will work. One step is breaking the connection between the two rear brake lights. You are required to run a separate wire for the brake light that is disconnected. Ther is also a wiring change at the brake light switch. Double check those connections to the wire bundle from the switch unit.