The Ford Barn - View Single Post - No Go -Coil Voltage

Karl · 12-20-2019, 06:16 PM

Thanks 6.3 Volts at Battery 6.3 Volts into and out of ignition switch 6.3 Volts at ignition side of resistor and 2.9 volts at coil side of resistor and at coil . I suspect the resistor is the problem and will jump it to confirm this afternoon I have a FORD NOS in my spares So may just replace it. Condensor relatively new but I have a Vertex Magneto condensor that will go in if I do end up changing the coli -Karl

12-20-2019, 06:16 PM	#4
Karl Senior Member Join Date: May 2010 Location: Manawatu, New Zealand Posts: 1,416	Re: No Go -Coil Voltage Thanks 6.3 Volts at Battery 6.3 Volts into and out of ignition switch 6.3 Volts at ignition side of resistor and 2.9 volts at coil side of resistor and at coil . I suspect the resistor is the problem and will jump it to confirm this afternoon I have a FORD NOS in my spares So may just replace it. Condensor relatively new but I have a Vertex Magneto condensor that will go in if I do end up changing the coli -Karl __________________ Such a fine sight to see-Its a Girl, My Lord, in a Flatbed Ford slowin' down to take a look at me.