The Ford Barn - View Single Post - No Go -Coil Voltage

deuce_roadster · 12-20-2019, 04:43 PM

I don't think 2.9 volts at the coil will produce a spark. run a jumper from the hot side of the floor starter switch to the coil and see if it starts. You could have bad connections somewhere if the battery is indeed good and fully charged. What is your fully charged voltage at the battery?

12-20-2019, 04:43 PM	#2
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,800	Re: No Go -Coil Voltage I don't think 2.9 volts at the coil will produce a spark. run a jumper from the hot side of the floor starter switch to the coil and see if it starts. You could have bad connections somewhere if the battery is indeed good and fully charged. What is your fully charged voltage at the battery?