The Ford Barn - View Single Post

Joe K · 06-26-2019, 05:14 AM

If you're going to do either the dimple or the piston ALWAYS turn the engine in the direction of normal rotation.

I have lost motion too. Wife says I'm lazy. I tell her only slightly less than perfect fit but as long as motion is always forward I'm good with it.

Joe K

06-26-2019, 05:14 AM	#7
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,188	Re: Locating dimple on timing gear If you're going to do either the dimple or the piston ALWAYS turn the engine in the direction of normal rotation. I have lost motion too. Wife says I'm lazy. I tell her only slightly less than perfect fit but as long as motion is always forward I'm good with it. Joe K __________________ Shudda kept the horse.