The Ford Barn - View Single Post

28ACoupe · 12-04-2013, 03:08 PM

I am contemplating building a very low profile set of turn signals for my coupe. Obviously the car didn't have them from the factory but I plan on driving it daily so safety is a good idea.

My plan is to make use of the 6v system and solid state components for the flashing system and use LED's for the actual lights as they are very small and very bright.

I will keep you all posted on the progress of this when I get to it. I suspect the whole project will cost something around $20 to $50 in parts.

12-04-2013, 03:08 PM	#12
28ACoupe Senior Member Join Date: Jun 2012 Posts: 559	Re: Turn signals with hidden switch I am contemplating building a very low profile set of turn signals for my coupe. Obviously the car didn't have them from the factory but I plan on driving it daily so safety is a good idea. My plan is to make use of the 6v system and solid state components for the flashing system and use LED's for the actual lights as they are very small and very bright. I will keep you all posted on the progress of this when I get to it. I suspect the whole project will cost something around $20 to $50 in parts. __________________ 1928 Model A Business Coupe Rebuild picture gallery here The light at the end of the tunnel has been turned off due to budget cuts.