The Ford Barn - View Single Post

alanwoodieman · 03-17-2021, 08:10 PM

drill the hole as low as you can, especially if you have a regrind cam. a lot easier to drill the hole than to grind down the top of the lifter bores

03-17-2021, 08:10 PM	#4
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,978	Re: Flathead Adjustable Lifter question drill the hole as low as you can, especially if you have a regrind cam. a lot easier to drill the hole than to grind down the top of the lifter bores