06-04-2015, 12:44 PM
|
#19
|
|
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Generator Brushes and Adjustment and How It Works
Quote:
Originally Posted by jax55
Tom, as usual you have come through with an excellent post and pictures to resolve a mystery to some..me included. Thanks for taking the time and effort to help clear this up.
|
Tom's pic, showing the "slip" ring that the brush is mounted to, helps clear up some "mystery"! His tip about prying against the mounting post would eliminate damage, if the "slip" ring was a little too tight. He also mentioned that the 3rd brush was smaller, which helps to identify it. THANKS AGAIN, TOM!!
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
|
|
|