The Ford Barn - View Single Post - Generator Brushes and Adjustment and How It Works

Tom Wesenberg · 06-03-2015, 11:50 PM

Yes, see my second picture showing the ring that pivots around the center of the end plate. Unless it's been taken apart, cleaned and lubed, you'll have to use a screwdriver to move the ring. I pry against the post for the brush holder. Do NOT pry against the brush itself.

06-03-2015, 11:50 PM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Generator Brushes and Adjustment and How It Works Yes, see my second picture showing the ring that pivots around the center of the end plate. Unless it's been taken apart, cleaned and lubed, you'll have to use a screwdriver to move the ring. I pry against the post for the brush holder. Do NOT pry against the brush itself.