Thread
:
Best practice in removing '54 F100 doors
View Single Post
10-29-2020, 07:55 PM
#
4
dmsfrr
Senior Member
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,607
Re: Best practice in removing '54 F100 doors
If you drill an 1/8th inch hole thru the door side of each hinge into the door before disassembly, you can use them to index the door into the original position when reassembling.
dmsfrr
View Public Profile
Send a private message to dmsfrr
Find More Posts by dmsfrr