The Ford Barn - View Single Post

61Klassic · 10-08-2020, 03:43 PM

Just bringing up an old thread of mine. Ended up borrowing a few heads. None of the off the shelf heads fitted with my .430” lift cam and 1.72” valves. Ended up getting a pair of MCF heads from Gollers Hot Rods.
Still had to work the chambers a bit which are now at 82cc. Spark plugs are in a good location on these heads.
With my custom made valves (Farrea, non dished) I have 9.26cr which sounds ideal, especial with how much I should be able to flow in the higher rpm

10-08-2020, 03:43 PM	#20
61Klassic Member Join Date: Jul 2019 Location: Kent UK Posts: 35	Re: 8BA Edelbrock head clearance Just bringing up an old thread of mine. Ended up borrowing a few heads. None of the off the shelf heads fitted with my .430” lift cam and 1.72” valves. Ended up getting a pair of MCF heads from Gollers Hot Rods. Still had to work the chambers a bit which are now at 82cc. Spark plugs are in a good location on these heads. With my custom made valves (Farrea, non dished) I have 9.26cr which sounds ideal, especial with how much I should be able to flow in the higher rpm