Thread: Model B condenser
View Single Post
Old 02-25-2018, 02:07 AM   #8
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Model B condenser
Quote:
Originally Posted by Ian in Mississauga View Post
I have a model B distributor that I want to try. I already have a B timing gear cover and an ignition cable that will work. I had planned to use a model A condenser from A&L. Here's the problem: I see from Vince Falter's site that the 2 condensers have different capacitances.(.20-.25 microfarads for the A and .45-.63 for the B). Is the A&L condenser still a good choice?


I wonder if the B reading is a misprint somewhere along the line?


All the ignition capacitors I know of are between .20 and .30 microfarads.
Tom Wesenberg is offline   Reply With Quote