Thread: Fuse....
View Single Post
Old 05-04-2020, 02:06 AM   #8
Tom Endy
Senior Member
 
Tom Endy's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 3,134
Default Re: Fuse....

It may be that you have a poor ground on the battery that is allowing the generator voltage to run wild. Check the connection of the ground strap to the frame. It is out of sight and may have been neglected for years and become corroded and supplying a poor ground.

Remove the battery to access the cable. Remove the cable from the frame and wire wheel the end along with the nut and bolt. Clean the mounting boss on the frame so that it is bright shinny metal. Also clean the power cable and the battery terminals.

Tom Endy
Tom Endy is offline   Reply With Quote