Re: Head Gasket repair 1936 21 stud
Been a while since updating.. @Tiinker, the cloth and oil worked perfectly for cleaning up the rust spots in the cylinders. I did the coat hanger trick to get the casting sand from the rear of he block. What seemed to work best is after breaking up all the hardened sand, I used a wet / dry vac and was able to suck out all the loosened sand and rust. I’m still got to do the driver side, but this works great! I’ll post some pictures in a bit.
In the meantime, I dropped my heads off a few weeks ago at a local machine shop. I had him shave .040” off.
__________________
-Troy
Zephaniah 3:17
|