The Ford Barn - View Single Post

George/Maine · 05-19-2014, 04:19 PM

Make sure you have the correct coil and resister for 12 volts.
Then wire direct to resister wired to coil.
if it runs good your problem is all the mickey mouse wiring.

05-19-2014, 04:19 PM	#8
George/Maine Senior Member Join Date: May 2010 Location: Mid coast Maine Posts: 1,878	Re: Old problem revisited, rough running 8BA Make sure you have the correct coil and resister for 12 volts. Then wire direct to resister wired to coil. if it runs good your problem is all the mickey mouse wiring.