The Ford Barn - View Single Post - Distributor Removal Tip Re Ignition Cable Clamp

Tom Endy · 09-26-2020, 11:14 PM

If you take the clamp off, replace it with a spacer the same thickness or replace the extra long stud with a shorter one, otherwise you can bottom out on the threads and not have that head bolt tight and you will blow a head gasket in that area.

Tom Endy

09-26-2020, 11:14 PM	#8
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: Distributor Removal Tip Re Ignition Cable Clamp If you take the clamp off, replace it with a spacer the same thickness or replace the extra long stud with a shorter one, otherwise you can bottom out on the threads and not have that head bolt tight and you will blow a head gasket in that area. Tom Endy