View Single Post
Old 02-27-2020, 12:48 PM   #13
DNLs1930
Senior Member
 
DNLs1930's Avatar
 
Join Date: May 2019
Location: Fort Worth side of DFW
Posts: 171
Default Re: Brake Rod Anti Rattler

Quote:
Originally Posted by DNLs1930 View Post
THANKS Marty!!

Found them!! It would seem they should be interchangeable and agree probably less susceptible to breaking.
Quote:
Originally Posted by marty in Ohio View Post
The other option to the Smith and Jones flat springs, pictured, are the 1931 style springs. To my mind they work better and I don't think the vibration mentioned will wear them out. They go on the same and are available at all the suppliers and usually for fewer dollars. Snyder's sell them on page A-108 in their 2019 catalog.
Marty


Marty,
Can these anti-rattlers be installed without disconnecting the brake rods? The photo does not really show the "loop" but it looks like it is a "closed loop" and would require the brake rods to be disconnected.
THANKS!!
David
Attached Images
File Type: jpg A_2504_2866_B.jpg (28.9 KB, 11 views)
DNLs1930 is offline   Reply With Quote