View Single Post
Old 09-10-2020, 02:37 PM   #4
Smooth_One
Senior Member
 
Smooth_One's Avatar
 
Join Date: Apr 2016
Location: St Clair, Michigan
Posts: 395
Default Re: Engine not starting.

Quote:
Originally Posted by ryanheacox View Post
It shouldn't keep the engine from cranking unless it was stuck for long enough to run the battery down a ways. Easiest way to check is measure voltage at both sides of the cutout. Should be ~6V at the output of the cutout where the wires attach and 0V at the generator stud.
Thanks I’ll check V on both sides tonight. It cranks over just doesn’t fire.
__________________
Isaiah B.
1928 all metal Tudor
Smooth_One is offline   Reply With Quote