The Ford Barn - View Single Post

Bill G · 07-07-2020, 02:57 PM

Even with normal installation, I have had to hammer on them to get them out. Be sure to put the domed nut on the bolt a good distance and beat on the domed nut so you don't screw up the threads on the bolt.

07-07-2020, 02:57 PM	#5
Bill G Senior Member Join Date: Jun 2017 Location: Walla Walla, WA Posts: 1,045	Re: King Pin Retaining Bolts Even with normal installation, I have had to hammer on them to get them out. Be sure to put the domed nut on the bolt a good distance and beat on the domed nut so you don't screw up the threads on the bolt.