The Ford Barn - View Single Post - Suggestions for rattle can base color 34 woodgraining?

95476 · 06-10-2020, 12:27 PM

Rustoleum Red Automotive Primer, black printers ink, brown printers ink, spray clear over it.
You can layer it you get the effect you want. Follow the directions on the can about recoating times. If you recoat too soon it can lift.
I have even used Minwax wood stain (mahogany) as a color.
Thin with mineral spirits so it won't lift the primer.

06-10-2020, 12:27 PM	#11
95476 Senior Member Join Date: Jan 2018 Posts: 413	Re: Suggestions for rattle can base color 34 woodgraining? Rustoleum Red Automotive Primer, black printers ink, brown printers ink, spray clear over it. You can layer it you get the effect you want. Follow the directions on the can about recoating times. If you recoat too soon it can lift. I have even used Minwax wood stain (mahogany) as a color. Thin with mineral spirits so it won't lift the primer.