View Single Post
Old 01-10-2019, 05:04 PM   #15
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
Default Re: Seat belts - to be or not to be?

Quote:
Originally Posted by burner31 View Post
Anchor them to the body...NOT the frame.
WHY?
If it is because you think the body will come loose from the chassis and squash you, that is an old wife's tale. There have been threads here showing photos of wrecked cars from the Model A era. Some were very badly damaged and I don't think a single one of them had the body come loose. Maybe on the odd occassion, the body was so badly damaged that it disintegrated but a body as a whole does not come off. Other photos showed the body still attached to a very badly twisted chassis, yet still attached.
Regulations here require seat belts be attached to the chassis if no suitable anchor points are available, as in a Model A.
That story seems to have survived reason for years just like "The water flows too quickly through the radiator for it to have time to cool". Forget it!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote