Thread: rebuilding a pre-36 steering box - parts interchangeability
View Single Post
Old 11-24-2019, 02:38 AM   #31
Mark from Australia
Senior Member
 
Join Date: May 2010
Posts: 120
Default Re: rebuilding a pre-36 steering box - parts interchangeability
Quote:
Originally Posted by 35fordtn View Post
You can use a 1935 worm gear, but the 35/36 sector shafts are longer than a 32/34
So that will just mean that the sector shaft will hang out further out of the steering box if fitted to an earlier steering box?
Last edited by Mark from Australia; 11-24-2019 at 02:47 AM.
Mark from Australia is offline   Reply With Quote