View Single Post
Old 10-02-2016, 03:59 PM   #9
shew01
Senior Member
 
shew01's Avatar
 
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
Default Re: '57 Fairlane 292 CID Oil Dipstick Missing Stop

Quote:
Originally Posted by oldave57 View Post
Just for comparison, I measured my oil dipstick (57 Fairlane 500 w/292) from the inside of the stop to the end of the dipstick measures 24.19 inches and from the end of the dipstick to the full mark measures 2.69 inches. When I fill with 5 quarts (including filter), the level comes up just above the full mark by 1/8" or so. I know the manual shows 5 quarts (plus 1 for the filter), but 5 quarts on my dipstick comes up right about the full mark (with filter change)

You might compare these dimensions against the replacement dipstick you have (with the stop) to see how it compares. You could adjust the levels slightly by modifying the dipstick tube also. The main thing is to have the level on full with the correct amount of oil.

Dave


My replacement is only 21 inches long. Thanks for the measurements. They will be handy.


Sent from my iPhone using Tapatalk
shew01 is offline   Reply With Quote