The Ford Barn - View Single Post

40 Deluxe · 12-01-2018, 11:17 PM

There is a lot of discussion on here about engine bearings, oil clearances, bearing materials, surface finish, etc., etc. I found a very interesting/informative site written by an engineer at King Bearing Company so I decided to start a new thread so anyone interested can check it out: substech.com/dokuwiki/doku.php?id=enginebearings Then click on: Engine bearings [SubsTech]

12-01-2018, 11:17 PM	#1
40 Deluxe Senior Member Join Date: May 2010 Location: now Kuna, Idaho Posts: 3,779	more on bearing clearances There is a lot of discussion on here about engine bearings, oil clearances, bearing materials, surface finish, etc., etc. I found a very interesting/informative site written by an engineer at King Bearing Company so I decided to start a new thread so anyone interested can check it out: substech.com/dokuwiki/doku.php?id=enginebearings Then click on: Engine bearings [SubsTech]