View Single Post
Old 10-30-2011, 10:51 PM   #3
Marco Tahtaras
Senior Member
Marco Tahtaras's Avatar
Join Date: May 2010
Posts: 3,099
Default Re: wrong front cross member

Things may not be as bad as they seem. However some of what you put forth conflicts with my experience. Since I don't have an hour or several to type up all the variables I need answers to a couple questions to narrow it down.

First, do you have the engine serial number ON THE FRAME you are using? That will give us an approximation as to when the frame was put in service. Second, does the front cross member you are working with have a fairly large hole on the left (drivers) side for a radiator overflow tube?
Marco Tahtaras is offline   Reply With Quote