07-20-2020, 07:28 PM
|
#3
|
Member
Join Date: Dec 2018
Location: Locust Grove, OK
Posts: 84
|
Re: Pressure plate adjustment
Quote:
Originally Posted by ryanheacox
I made that mistake as well. Not horrible to adjust in the car just slow going. I made up a tool to gauge and set the finger depth to 11/16". I managed to get each finger adjusted to +/-0.004" which is probably as good as can be with the transmission installed. In my case it did solve my clutch chatter.
I'll try to grab a picture of my tool tomorrow. It's very ugly but functional.
|
Thanks I appreciate it
|
|
|