Quote:
Originally Posted by FLEETVDO
Thank You.
The Truck is in very nice condition. It was a 10 year restoration project with many new parts and alot of polish.
I do have a slight intermittent idle issue.
I didn't think of that exhaust seal until I started listing what I have done on this forum.
I will let you know about the brass o ring/seal and try closing the GAV.
I don't know how to add an avatar.
Thanks for the welcome and the help. I will let you know.
|
My idle issue drove me crazy for weeks. Finally used a flexible metal dryer vent hose sealed on the carburetor air inlet, routed it hanging from a radiator support rod towards the front of the engine. Issue went away. Then noticed a very slight soot mark on the manifold/muffler joint. When running you can not hear the leak.