View Single Post
Old 12-10-2021, 10:58 AM   #79
Kilohertz
Senior Member
 
Kilohertz's Avatar
 
Join Date: Jan 2021
Location: Slightly left of Vernon, BC
Posts: 155
Default Re: Let's start a junkyard fuel injection discussion

SUCCESS!!

I have been working on the GM TBI system as much as I can in the past month and have made some terrific progress. I machined the adapter plate for the throttle body, then polished it and mounted it on the engine. I have figured out the harness and for testing purposes have just hung it on the firewall. I am using the stock Chevy 305 ECM just to try my ideas before I start reprogramming the internal EPROM. I bought an external fuel pump that will meet the TB requirements as I didn't want to fill the new tank with gas until I finish the fill pipe fabrication. I also had to machine another GM distributor as the TBI system uses a module and inductive pickup in the distributor. I will detail the ECM minimum requirements later, but for now....a video is worth 1,000 words.

More later.

Cheers









The video link

https://www.dropbox.com/s/pfm21cuj7t..._1356.mov?dl=0
__________________
1949 Ford F-47 with a '51 8BA Flatty, GM TBI fuel injection system, and a grey shop cat, Spot.
Kilohertz is offline   Reply With Quote