Quote:
Originally Posted by caddy58
Hi everyone, I am looking for drawings or pictures with dimensions for the holes to attach the brake and clutch pedals to my 1935 Ford Coupe. The frame has been restored but the holes for the bracket are missing. If possible also the holes for the bracket of the steering gear. Thank´s
|
Hey
caddy58 .....Pictured below is a '35 chassis. Look at the lower portion of the "X" rail seen at the bottom, left part of the picture. That is the DRIVER-side "X" rail that the pedals would mount on. You'll see THREE larger holes on the vertical surface in that picture. The large hole toward the LEFT-most side of the picture is the location of the original pedals. Note that there are FOUR smaller BOLT holes surrounding that larger hole. Those are the four bolt holes designed to hold the 1935 brake/clutch pedal bracket. Hope that this helps. DD
