Re: Let's start a junkyard fuel injection discussion
I finished making the adapter plate and custom gasket for it and can now proceed with mounting the 4 bbl manifold and throttle body.
It's interesting to note that I used more woodworking tools than metal tools to make this plate. The drill press for the holes and my compound sliding miter saw with carbide blade to cut the outside dimensions, and a router with the roller bearing 45* cutter to radius the edges, both worked amazingly well on the aluminum, cool.
More later....
Cheers
__________________
1949 Ford F-47 with a '51 8BA Flatty, GM TBI fuel injection system, and a grey shop cat, Spot.
|