The Ford Barn - View Single Post

Juergen · 11-05-2020, 10:16 AM

One should get the Early Ford V8s 38-39 reference book. It has an extensive explanation of the different heaters and their component locations, mentioning that most were dealer installed. For the 37-38 blower switch it says "78-15168 attaches to the bottom flange of the instrument panel in holes that are either pre-punched or have to be drilled". Kube shows a 39 dash with pre-punched hole. Jacques shows a 38 dash that has to be drilled if he wants to follow the book.

11-05-2020, 10:16 AM	#9
Juergen Senior Member Join Date: May 2010 Posts: 503	Re: 1939 heater / switch in 1938 wagon One should get the Early Ford V8s 38-39 reference book. It has an extensive explanation of the different heaters and their component locations, mentioning that most were dealer installed. For the 37-38 blower switch it says "78-15168 attaches to the bottom flange of the instrument panel in holes that are either pre-punched or have to be drilled". Kube shows a 39 dash with pre-punched hole. Jacques shows a 38 dash that has to be drilled if he wants to follow the book.