The Ford Barn - View Single Post - Heater door placement in firewall for Otwell heater

Big hammer · 03-22-2020, 07:40 AM

My Otwell heater's door fit's in the corner of the firewall. I would keep looking for a original door before you cut a hole in the firewall. The connection between the wall and door, I use a piece of heat riser tubing from a modern car that's available at auto parts store's.

03-22-2020, 07:40 AM	#5
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: Heater door placement in firewall for Otwell heater My Otwell heater's door fit's in the corner of the firewall. I would keep looking for a original door before you cut a hole in the firewall. The connection between the wall and door, I use a piece of heat riser tubing from a modern car that's available at auto parts store's. __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done