View Single Post
Old 09-16-2019, 04:16 PM   #5
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
Default Re: I need the proper names of parts I need for my pickup

Quote:
Originally Posted by stillwater View Post
I have my cab off and on rollers, stripping the parts off so I can get my cab aligned back up...

The windshield frame was of poor quality and bondo'd up not so well. Getting a new one. Also, I need the side posts on each side of the windshield. Between the windshield frame, and the door.

And the flat piece above the windshield frame, and I think there's a piece at the bottom of the windshield opening, thin, that goes across the cowl. Top is already off, along with doors and back window. Possibly some small parts I can't quite see or don't know about.

I cannot find any literature that says what their proper names are, so when I look at any of my many different retail catalogs, The names don't mean much when I don't know what each part is called.

Any good help appreciated! Thanks

The correct nomenclature can be found in Ford Parts Price Booklets. These are the books that Ford's agencies (dealers) used to order parts from.


Unfortunately most parts suppliers do not use Ford's nomenclature nor Ford's part numbers. Therefore the best thing to do is to contact each of the parts suppliers directly and ask for technical help. Explain the item you are needing and use Ford's nomenclature and part number to find if they have the same as you are describing.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote