The Ford Barn - View Single Post

Jim M · 06-13-2021, 03:08 PM

Yesterday I put two pumps of grease in the throw out bearing and went for a ride. It is MUCH better but I still got a couple of the "spring sounds". I didn't want to put too much grease in but in thinking about it this is probably where too much is better than two little. Thanks sooo much for all the input and any other suggest are greatly appreciated. I do NOT look forward to a motor removal but will if I have to. Thanks again!!

06-13-2021, 03:08 PM	#10
Jim M Senior Member Join Date: Nov 2010 Location: Sebastian, FL Posts: 479	Re: Preferred way to get to pressure plate Yesterday I put two pumps of grease in the throw out bearing and went for a ride. It is MUCH better but I still got a couple of the "spring sounds". I didn't want to put too much grease in but in thinking about it this is probably where too much is better than two little. Thanks sooo much for all the input and any other suggest are greatly appreciated. I do NOT look forward to a motor removal but will if I have to. Thanks again!!