View Single Post
Old 12-21-2017, 09:08 AM   #8
Rex_A_Lott
Senior Member
 
Join Date: Jun 2011
Location: Upstate South Carolina
Posts: 794
Default Re: Leaking head gasket

I'm not a fan of backing the nuts off before re torque, but if you do choose to do it that way, go half way, say 30lbs, in Sequence, and then on to 55, in the correct order. Like was stated, you may have drive it and do this a few times before it ever takes a set. Good luck!
Rex_A_Lott is offline   Reply With Quote