The Ford Barn - View Single Post

Purdy Swoft · 12-12-2017, 10:28 PM

The choke shaft will come out easily after the choke plate is removed, at least that is the way it has worked for me . The choke plate screws can be hard to remove . Make sure that the screw driver that you use fits the slot in the screw as close as possible. I have used the torch to heat the heads of the screws red hot , be carefull .

12-12-2017, 10:28 PM	#3
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: Carburetor Choke Shaft The choke shaft will come out easily after the choke plate is removed, at least that is the way it has worked for me . The choke plate screws can be hard to remove . Make sure that the screw driver that you use fits the slot in the screw as close as possible. I have used the torch to heat the heads of the screws red hot , be carefull .