The Ford Barn - View Single Post

tubman · 03-09-2021, 02:37 PM

I will have to say that the information I have received from this and other forums and also "YouTube" is a lot better than I used to get back in the day. Most of my sources back then were, let's say, a bit questionable. They came up with such gems as "don't run thermostats in a flathead" and that 1/8" wall 2X2 tubing was adequate for making a "T" bucket frame. There were others that I have thankfully forgotten.

03-09-2021, 02:37 PM	#47
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,320	Re: Who's gonna fill their shoes? I will have to say that the information I have received from this and other forums and also "YouTube" is a lot better than I used to get back in the day. Most of my sources back then were, let's say, a bit questionable. They came up with such gems as "don't run thermostats in a flathead" and that 1/8" wall 2X2 tubing was adequate for making a "T" bucket frame. There were others that I have thankfully forgotten.