The Ford Barn - View Single Post

katy · 11-21-2021, 11:35 AM

When you remove the axle housings from the centre section check the gaskets. There should be one gasket on either side, but may have more than one on either or both sides. Sometimes additional gaskets are used/required for adjusting ring to pinion mesh.

11-21-2021, 11:35 AM	#7
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,046	Re: Replace differential seals and gaskets When you remove the axle housings from the centre section check the gaskets. There should be one gasket on either side, but may have more than one on either or both sides. Sometimes additional gaskets are used/required for adjusting ring to pinion mesh. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!