Quote:
Originally Posted by Neshkoro
I ordered a new set of points from Ecklers. When I went to install them, first they would not fit on the pivot pin in the distributor. Then the other contact would not screw into the contact block. I will be calling them Monday.
|
There have been many threads regarding inferior parts quality and issues being billed or receiving refunds from MACS / Ecklers.
Just a suggestion, but you might want to use vendors that support these forums such as Berts, Snyders, Brattons and others, that specialize on Model A Fords, are knowledgeable, will answer your questions etc.
Look at the "sticky" post at the top of the Model A Forum, and look for Parts Houses, or for the particular product or service you need. You'll benefit from the collective experience of many users recommendations, as well as dealing with vendors offering quality parts