View Single Post
Old 08-04-2021, 08:05 AM   #9
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Ignition coils too far out of range?

Bill, I see you are from Walworth, N.Y. where I went to grade school. Upstate N.Y. is beautiful, or it was back in the 50's and 60's.
I bought my condenser tester on Ebay about 20 years ago, but it got burned up in the fire, so I'll have to look for another one.
A good simple check for the coil primary is to connect it to a 6 volt battery charger with an ammeter, and when the 2 primary terminals are connected it should draw about 4 amps.
Tom Wesenberg is offline   Reply With Quote