Quote:
Originally Posted by Kilohertz
Thank you '48 F1, appreciate the info.
I just finished doing all my research as well and came up with similar results. I found Hyundai Sonata and Mits various engines and a number of other makes with engines from 2.5L up to 4L that use this one. Fram FV311 crosses to Beck Arnley 045-0270, threaded 1/8-28 BSPT, 1/8" pipe thread. And yes, will suck/blow on it to confirm if it threads into the manifold vacuum area, or the road tube section. I read someone's post where he put it in backwards and the vacuum sucked out the little brass insert and wiped out his $3200 350. Yikes!
Cheers
|
I think that Fram one you listed is the likely candidate.....