The Ford Barn - View Single Post - PCV VALVE SYSTEM for 8BA with Early Intake Manifold

Kilohertz · 01-20-2021, 04:39 PM

Thank you '48 F1, appreciate the info.

I just finished doing all my research as well and came up with similar results. I found Hyundai Sonata and Mits various engines and a number of other makes with engines from 2.5L up to 4L that use this one. Fram FV311 crosses to Beck Arnley 045-0270, threaded 1/8-28 BSPT, 1/8" pipe thread. And yes, will suck/blow on it to confirm if it threads into the manifold vacuum area, or the road tube section. I read someone's post where he put it in backwards and the vacuum sucked out the little brass insert and wiped out his $3200 350. Yikes!

Cheers

01-20-2021, 04:39 PM	#48
Kilohertz Senior Member Join Date: Jan 2021 Location: Slightly left of Vernon, BC Posts: 155	Re: PCV VALVE SYSTEM for 8BA with Early Intake Manifold Thank you '48 F1, appreciate the info. I just finished doing all my research as well and came up with similar results. I found Hyundai Sonata and Mits various engines and a number of other makes with engines from 2.5L up to 4L that use this one. Fram FV311 crosses to Beck Arnley 045-0270, threaded 1/8-28 BSPT, 1/8" pipe thread. And yes, will suck/blow on it to confirm if it threads into the manifold vacuum area, or the road tube section. I read someone's post where he put it in backwards and the vacuum sucked out the little brass insert and wiped out his $3200 350. Yikes! Cheers __________________ 1949 Ford F-47 with a '51 8BA Flatty, GM TBI fuel injection system, and a grey shop cat, Spot.