View Single Post
Old 09-21-2020, 11:23 AM   #4
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 9,733
Default Re: Disassemble Tudor Body

I would recommend that you NOT use 80 grit as this creates localized heat in the metal. and it also removes metal. Media blasting with aluminum oxide and low pressure (about 40 psi) is a better way. The Phosphoric is a good way to remove the rust however it will not remove the paint.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote