View Single Post
Old 09-17-2020, 08:48 AM   #13
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,090
Default Re: PCV valve good idea?

Quote:
Originally Posted by Will N View Post
The crankcase in the model a engine is very well vented with the large oil fill/crankcase vent tube. It should not be building up much back pressure in the crankcase that could cause a rear main leak- unless you might have put something like a mesh scouring pad in the oil fill cap to stop oil vapor blow-by from coating your engine compartment. But if you have excessive blow-by, then you likely have a piston ring problem. Like 1930-Pickup said, band-aid.

Ford used a larger diameter oil fill tube on the model B engines to reduce crankcase pressure .
Purdy Swoft is offline   Reply With Quote