Quote:
Originally Posted by Tom Wesenberg
Since they are two seperate operations independant of each other, I'd do the head first and drive it, then decide if you think you need to do more. You might find the head alone is fine.  |
I can't resist... Forget the fact this is a commercial - I still think its funny. ( I don't have AT&T BTW)
"More is Better" 
Back to our regularly scheduled programming... I have been thinking of doing this also with my new motor. I've read up on the concept and I'm deciding whether or not to take it slow and ream it myself or take it to a machine shop and have my A manifold bored/drilled out.
-Aaron