View Single Post
Old 07-18-2016, 09:27 PM   #15
Senior Member
coupe1942's Avatar
Join Date: May 2016
Location: Ada, Oklahoma
Posts: 357
Default Re: Question on removal of ignition trim ring on instrument panel

There is a local plating shop in town and I hope to get by there soon to see what it would cost to re-plate it vs anything else being done. I have a couple of different issues on this pickup, so I have to prioritize them as to what to redo first and which project can wait.

Wed. is my payday and I have a speedometer to be sent off for a rebuild before I can get back to the instrument panel. My replacement of burned wiring is also higher up on the list of things to get the most attention, first.

A new nickle plated instrument panel would go well though, so I'll see what the cost runs locally at least and go from there.

Thanks for the info and ideas to ponder.
coupe1942 is offline   Reply With Quote