The Ford Barn - View Single Post

flatjack9 · 09-20-2021, 11:45 PM

I've never seen one drilled with 2 drillings from the factory. You can have a machine shop make a proper pilot bearing out of "oilite" material so it will clear the input shaft.

09-20-2021, 11:45 PM	#18
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,526	Re: ‘52 Flathead crankshaft end play I've never seen one drilled with 2 drillings from the factory. You can have a machine shop make a proper pilot bearing out of "oilite" material so it will clear the input shaft.