Re: 1928 Radiator Shell Lacing
This is the replacement lacing on my June '28 survivor phaeton. I replaced the original lacing a few years ago (it was falling apart), following the method of fixing (rivets) that was used on the original lacing that I was replacing. I trimmed the bottom of the lacing flush with the bottom of the radiator surround. The bottom rivet holds it in place well enough. This is the only picture that I have available now, but could take a better one if you want.
(Pardon the rusty water stain - I've since replaced the rad core, but that's another (disappointing) story.)
|