The Ford Barn - View Single Post

Lawrie · 05-31-2015, 07:26 AM

I would not use a heli coil in light of the OD of the coil,why not get a 12mm fine thread bolt,drill or ream out the hole it the flywheel.
I would feel a lot better if it were mine doing it this way.
Lawrie

05-31-2015, 07:26 AM	#18
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,215	Re: Stripped flywheel bolt I would not use a heli coil in light of the OD of the coil,why not get a 12mm fine thread bolt,drill or ream out the hole it the flywheel. I would feel a lot better if it were mine doing it this way. Lawrie